sawinredneck
Treehouser
Stephan might be able to adapt this to his DR, not sure how much power it has?
I'm clearing 10 acres of 1/2" to 3" of piss Elm and wasn't interested in bending that much!
A buddy lead me to this design, simple, cheap and very effective! 3/4" and smaller it slices right through it, bigger stuff you have to hit a few times, bigger yet, you have to get from three sides, but it works!
The box tubing is a bit large for my forks, but it works, 1/2" bolt on each keeps it on, the first design worked but I didn't use heavy enough angle iron, I had to beef it up the second time. The blade is an old wear edge off of a road grader that I cut down and sharpened to a knife edge. Works very well!
I'm clearing 10 acres of 1/2" to 3" of piss Elm and wasn't interested in bending that much!
A buddy lead me to this design, simple, cheap and very effective! 3/4" and smaller it slices right through it, bigger stuff you have to hit a few times, bigger yet, you have to get from three sides, but it works!
The box tubing is a bit large for my forks, but it works, 1/2" bolt on each keeps it on, the first design worked but I didn't use heavy enough angle iron, I had to beef it up the second time. The blade is an old wear edge off of a road grader that I cut down and sharpened to a knife edge. Works very well!