lumberjack
Young man on the go
I'm posting this on several forums, but I wanted it here first in case anyone wanted "dibs." Below is the copy/paste I've set up for the other forums.
I’ll be making a trip from Columbus, MS to Orlando, FL in the next week or two; the time frame is pretty open. The best way to contact me is via email at carl ru therford at hughes period net.
Here’s the planned route, although small detours/other routes with similar mileage isn’t a big deal. I will be in my F550, so that plays a role in the distances I can easily accept.
This thread is mainly for FTF transfers along this route. The revolver is easy to ship, the reloading setup is also shippable, but I don’t know what it will cost. I’m not going to price shipping for every tire kicker that comes about. It’s over 300lbs; freight would probably be the easiest.
I will entertain offers, but I'm not desperate for money.
So, now with the items that are left over from my competition shooting days:
Smith and Wesson 627, Millett rear sight with comp cuts (corners beveled), trigger job, chamfered chambers, extended firing pin, and SDM Fabrication’s cylinder release. CR speed belt, Speed-E-Rack, and CR Speed WSM II holster. The moon clips on the rack are HearthCo’s.
$1200
The reloading setup is based on a Dillon 650XL, here’s a list of most of the items.
$3100:
650XL
Case Feeder
Strong Mount/Bullet Tray/Handle
3 additional sizes for case feeder
Powder Check
6 Tool Heads
Tool Head Stand
Powder Measure Set
9mm/10mm/38/45/460/500 Dies
Foster Ultra Bullet Seater 308
223/308 Carb Dies
Redding 45-70
9mm/10mm/38/45/223/308 Conversion Kits
2001 Case Cleaner
2000 Media Separator
Bullet Puller
Dillon D Terminator Scale w/ cover
Digital Calipers
Spare Parts and Maint Kit
Tool holder and tools
Flip Tray
Stuck Case Remover
Kiss Bullet Feeder
21k+ 9mm Brass
Misc Brass
223 case gauge
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/Tw9Q4XObYzA?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Tw9Q4XObYzA?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Not shown in the video are the powders, bullets, and a few hundred primers that would be included on a FTF transfer.
The powders are all mostly full, some are unused entirely.
Starting from top left:
The bag and small cardboard box are 230gr 45 cal bullets from Precision Bullets in TX.
The center jug is 30.6lbs, 115gr 9mm bullets also from Precision (1800+)
The right box is just shy of 3k 180gr 10mm/40cal bullets also from Precision
The little plastic box is Barns 308 Triple Shocks, ~30-35
The bottom plastic box is Barry’s 350gr 50cal bullets, ~100
I’ll be making a trip from Columbus, MS to Orlando, FL in the next week or two; the time frame is pretty open. The best way to contact me is via email at carl ru therford at hughes period net.
Here’s the planned route, although small detours/other routes with similar mileage isn’t a big deal. I will be in my F550, so that plays a role in the distances I can easily accept.

This thread is mainly for FTF transfers along this route. The revolver is easy to ship, the reloading setup is also shippable, but I don’t know what it will cost. I’m not going to price shipping for every tire kicker that comes about. It’s over 300lbs; freight would probably be the easiest.
I will entertain offers, but I'm not desperate for money.
So, now with the items that are left over from my competition shooting days:
Smith and Wesson 627, Millett rear sight with comp cuts (corners beveled), trigger job, chamfered chambers, extended firing pin, and SDM Fabrication’s cylinder release. CR speed belt, Speed-E-Rack, and CR Speed WSM II holster. The moon clips on the rack are HearthCo’s.
$1200



The reloading setup is based on a Dillon 650XL, here’s a list of most of the items.
$3100:
650XL
Case Feeder
Strong Mount/Bullet Tray/Handle
3 additional sizes for case feeder
Powder Check
6 Tool Heads
Tool Head Stand
Powder Measure Set
9mm/10mm/38/45/460/500 Dies
Foster Ultra Bullet Seater 308
223/308 Carb Dies
Redding 45-70
9mm/10mm/38/45/223/308 Conversion Kits
2001 Case Cleaner
2000 Media Separator
Bullet Puller
Dillon D Terminator Scale w/ cover
Digital Calipers
Spare Parts and Maint Kit
Tool holder and tools
Flip Tray
Stuck Case Remover
Kiss Bullet Feeder
21k+ 9mm Brass
Misc Brass
223 case gauge
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/Tw9Q4XObYzA?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Tw9Q4XObYzA?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Not shown in the video are the powders, bullets, and a few hundred primers that would be included on a FTF transfer.
The powders are all mostly full, some are unused entirely.

Starting from top left:
The bag and small cardboard box are 230gr 45 cal bullets from Precision Bullets in TX.
The center jug is 30.6lbs, 115gr 9mm bullets also from Precision (1800+)
The right box is just shy of 3k 180gr 10mm/40cal bullets also from Precision
The little plastic box is Barns 308 Triple Shocks, ~30-35
The bottom plastic box is Barry’s 350gr 50cal bullets, ~100
