Need wiring help

[No_Bivy]

I neeed the wiring diagram for a boxer to 427
Has perkins diesel, 3 cyl

Does not seem to be getting fuel, might be a relay

Replaced the relay , no go

Old one back on, no go( I might have connections wrong...doh)

Looked on boxer web site, just manuals, no diagrams

 

[No_Bivy]

TL 427....03 is the year

 

[arborworks1]

Are you getting fuel out of your tank?

 

[woodworkingboy]

I don't know if you could exactly call it a schematic, but the parts manual at their website shows the wiring group for the 427 and 427W, with the hookup to the solenoid. Have you seen that?

 

[No_Bivy]

Are you getting fuel out of your tank?

Yes

 

[No_Bivy]

I don't know if you could exactly call it a schematic, but the parts manual at their website shows the wiring group for the 427 and 427W, with the hookup to the solenoid. Have you seen that?

No

 

[woodworkingboy]

Here on page 24.

http://www.boxerequipment.com/media/pdf/manuals/427_Parts.pdf

 

[No_Bivy]

Here on page 24.

http://www.boxerequipment.com/media/pdf/manuals/427_Parts.pdf

Not right model
All their manuals show is parts.... No wiring diagram

Mine is a three cylinder diesel

 

[Husabud]

Check the motor manufacturers site. Most equipment companies only show their machine and not necessarily the power plant.

 

[FJR]

Can you call a dealer and get a schematic? We just got one yesterday for our vermeer.

 

[Cobleskill]

http://search.yahoo.com/search?p=kubota+forums&ei=UTF-8&fr=moz35

These are where I usually find info. Somebody has usually had the same problem before.

 

[Cobleskill]

Sorry, substitute Perkins or Boxer.

 

[woodworkingboy]

Bum steer, sorry.

 

[arborworks1]

So did you get it working, John?

 

[No_Bivy]

Yes
Got the diagram finally,
Turned out to be bad relay and silly 1amp fuses
Tech in Florida said to replace with 3 amp ones..... Fired right up

Now I think I may have a worn flywheel though....stater seems like its slipping . Teeth look ok..l.but I dunno
I will take the mechanic next week
He did say the little Perkins was bullet proof, I have 2000 hrs on it, he has seen them with 6 k

 

[sotc]

Shoot, been away, I have the diagram for the gasser in that model, might have been of some help