LONGBOY

I like Silky a lot but their pole saws are indeed not for rough handling.

True that! I just put the third blade on my Longboy. The way it's balanced it will fall blade down even if you drop it from 15'. I've dropped mine three times now from height and it's beat to hell, but the buttons still work and it telescopes as well as it did new.

Still, I like it best if I have to have a pole saw in the tree and move around. It's compact and safe compared to other pole saws. You have to put a $25 hook on it though.

On the ground though I like a Jameson head and 3 short poles, same for the Marvin pruner. The fixed head with a short blade on a 4' pole is perfect for pruning young trees, Bradfords and raising low canopies.

Guy M. recently did a comparison of polesaws and I got to play with a few of'em. The Zubat is nice because it's light and small but it doesn't fold or have a hook.

The tool that got my attention was the Wolfgarten telescoping pole coupled with the 4:1 Limb Lopper.
Not incredibly durable but light and lickety-split fast to use. The pole has a one touch to advance and retract mechanism and the pruner cuts through hard 1" wood like it's butter. Leaves a clean cut you would guess was done with a bypass pruner even though it's an anvil lopper. Killer setup for use on the ground. Its all modular, you can snap a saw head on it, other stuff too probably. Nice gadget.
 
14' ash pole with mondo blade.......

see.............
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/ExClVQ7CdVs&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/ExClVQ7CdVs&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/SNU4B4BToIE&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/SNU4B4BToIE&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>


deadwood slaying master......
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/d15nTAnii_U&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/d15nTAnii_U&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>
 
at lunch, you can spar:D
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/HgT_5iOIVFA&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/HgT_5iOIVFA&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>
 
14' ash pole with mondo blade.......

That's too funny.

I thought many times to myself :/: that if I had a choice at using a weapon as self defense- against something like,, oh-- I don't know-- maybe a pit bull er' something, it would be the 12' pole-saw with Japanese razor technology!:evil:

I swear,, I've been using one for so long, that I would make hamburger out of ole' fido! 8)
 
Last edited:
The last time I was charged by a dog (belonged to the neighbor two doors down from where I was working), I had my saddle on and pulled out my Zubat. I took three steps towards the dog and she stopped 15' away and sat down. Lucky for her.
 
The Silky's are pretty awesome saws, but definitely on the fragile side. They don't usually survive the kind of abuse most folks in this business dish out. Personally I prefer the good ol fiberglass poles. I use them for my pole saw, pole pruner, and big shot. I also found out they're a lot easier to repair - I ran over the ends of 3 poles with the truck a while ago and was able to just cut the broken ends off and put on 3 new couplers for about $30. The last Silky pole section I sent to somebody was about $75! They do cut better though....
 
I'm kinda shocked. By the way in which the Silky saws are advertised, I would've though them to be tough as steel.

I really like my fiberglass two piece except that they're starting to bow toward the center.

Would turing the couplers change that?

If someone knows for sure, I will give it a shot...
 
backed over a pole myself, bought a new one, that tool made me money over its cost many times since I bought it. :)
 
Back
Top