Search results for query: *

What brand motor is that?

Anyone using spray on wax to keep equipment looking sharp?

I spoke to the owner of Jmac trucks about his setup. And that is about extent of the progress. My original plan for the roof system was a lightweight frame with mesh tarp bolted on. A large piano hinge on the front with an electric ram cylinder to stand the top vertical.

Did you take the muffler off to drill it?

Need some ideas for a retractable roof on the chip box.

A 7015 Carlton would suit you well..

Those Isuzu motors use the exhaust brake to warm the motor on cold mornings. At idle it will close the brake to put back pressure on the motor and get it to operating temp or keep it at temp.

Does it stop after the truck gets to operating temp?

Schneider tree care does work in Spartanburg area. Also call Carlton and see if they will give you list of outfits from Spartanburg.

This did the trick. It felt much stronger today as well.

I'm having trouble with the saw dieing as I hit the throttle after it idles for a few seconds. It fires right back up and cuts fine. Any one else having issues with the mtronic?

We have been using atlas therma gloves most winters. Any other recommendations for warm gloves?

i apologize for not chiming in on this thread till now. We have been running the lift for a solid month now. Moving around a jobsite is cakewalk now. 5 mph may not sound speedy but when you are cruising thru a highly landscaped yard and resetting on the next tree all by yourself it turns into...

Make sure the kids are mindful of the pretend hardhats...

When you say no noise are you referring to the fan on the hydro cooler not running?

Well now I have to get a modded 201!

I'm stoked to be able to upgrade my existing chipper. Carlos let me know that terex had approached him about becoming a dealer for their environmental equipment. I had been looking at several terex chippers a few days beforehand. Everything fell in place. If you are in the market for new...

I welded golfcart front axle and would just place the small end on The axle shaft and strap it. I never took it further as the need to get 16 foot logs wasn't needed any more.

I sprayed some contact cleaner on the unit where it attaches to the helmet mount. That cleared up most of the static and issues it was having.

That's a good bit of stumps... Are they all in one area?