sawinredneck
Treehouser
Yeah, I'm still alive, if that's what you want to call it, it's not something I'd wish on my worst enemy!
It kills me, but I have to sell my baby, I just don't have it in me to run it any more. I dropped a 45" Cottonweed last weekend for some neighbors and it was all I could do to get the damn thing on the ground, I just can't handle this beast anymore, and I hate to let it go, but first dibs go here.
This saw was custom built for me, by "Freakingstang" on AS, it was documented in this thread, http://www.arboristsite.com/communi...l-whos-drinking-with-me-tonight-thread.33523/ if you care to dive in that far to find the info. (sorry, it's a LONG thread!)
Basically it's a Stihl 046 with a big bore kit that's been muffler modded and woods ported, it will easily pull a 32" bar in hardwood with an 8 pin sprocket!
I'll have to dig everything out to be for sure, but this is a powerhead, a 25" Stihl rollomatic ES bar with I think? 5 chains, then two GB Titanium 32" bars, one NIB, and I think? three chains. Here's the kicker, this is all .063", so keep that in mind!
The saw runs like a striped ape! Always had premium gas and Royal Purple at 50:1, if you want a vid of it running and cutting, I'll make one! It's that good! I have a 7 and 8 pin sprocket that will come with it, it pulls the 32" with authority in hardwood with the 8 pin, but I try to limit it to the 7 pin as it doesn't seem to have enough oiler for the longer bar in hardwoods.
I'll try to get pics up tomorrow, and you can email me at [email protected] as my normal email seemed to crap out! I'd like $800 plus shipping as I know the GB titanium bars are long gone. I paid over $600 for powerhead only, so I don't think I'm too far out of line?
It kills me, but I have to sell my baby, I just don't have it in me to run it any more. I dropped a 45" Cottonweed last weekend for some neighbors and it was all I could do to get the damn thing on the ground, I just can't handle this beast anymore, and I hate to let it go, but first dibs go here.
This saw was custom built for me, by "Freakingstang" on AS, it was documented in this thread, http://www.arboristsite.com/communi...l-whos-drinking-with-me-tonight-thread.33523/ if you care to dive in that far to find the info. (sorry, it's a LONG thread!)
Basically it's a Stihl 046 with a big bore kit that's been muffler modded and woods ported, it will easily pull a 32" bar in hardwood with an 8 pin sprocket!
I'll have to dig everything out to be for sure, but this is a powerhead, a 25" Stihl rollomatic ES bar with I think? 5 chains, then two GB Titanium 32" bars, one NIB, and I think? three chains. Here's the kicker, this is all .063", so keep that in mind!
The saw runs like a striped ape! Always had premium gas and Royal Purple at 50:1, if you want a vid of it running and cutting, I'll make one! It's that good! I have a 7 and 8 pin sprocket that will come with it, it pulls the 32" with authority in hardwood with the 8 pin, but I try to limit it to the 7 pin as it doesn't seem to have enough oiler for the longer bar in hardwoods.
I'll try to get pics up tomorrow, and you can email me at [email protected] as my normal email seemed to crap out! I'd like $800 plus shipping as I know the GB titanium bars are long gone. I paid over $600 for powerhead only, so I don't think I'm too far out of line?
