Al Smith
Mac Daddy
The Ms 200T is one of the best climbing saws ever made .It is however one of the most frustrating to work on .
Probably the most challenging thing to do on one is reassemble the handle .It's not that hard if you know a few tricks .I do but it still took me 20 minutes -half an hour to get it back together .
Start with the boot end first .Spray the boot with WD-40 .Form a loop on the bottom side of the boot with a stout cord ,chalk line whatever .Start the top side of the boot through the hole in the handle using a blunt screwdriver or something .Be careful not to tear it .Needle nose pliers are handy too .
Once the top part has started in ,walk the string around to get the bottom .
Reassemble the rest of it then .Make sure to get the impulse line attached to the under portion of the handle .
Probably the most challenging thing to do on one is reassemble the handle .It's not that hard if you know a few tricks .I do but it still took me 20 minutes -half an hour to get it back together .
Start with the boot end first .Spray the boot with WD-40 .Form a loop on the bottom side of the boot with a stout cord ,chalk line whatever .Start the top side of the boot through the hole in the handle using a blunt screwdriver or something .Be careful not to tear it .Needle nose pliers are handy too .
Once the top part has started in ,walk the string around to get the bottom .
Reassemble the rest of it then .Make sure to get the impulse line attached to the under portion of the handle .