Machining/welding/millwright…molten metal

[SeanKroll]

So, ya don't use a farm jack on a tractor like that, huh?

 

[davidwyby]

So, ya don't use a farm jack on a tractor like that, huh?

Railroad jacks

 

[Burnham]

Wow, impressive work.

 

[davidwyby]

View attachment IMG_3331.mov

 

[davidwyby]

big hex


Boring rig drive coupling

 

[cory]

#buildingmerica

#peakofcivilization

 

[davidwyby]

Hex scale ref

That guy is the brains/engineer around here. I’m the reverse engineer

 

[davidwyby]

Flange repair overlaid with stainless for corrosion resistance

View attachment IMG_3350.mov

 

[Marc-Antoine]

I'm always baffled to see machines where you have to stand on to work with.

 

[flushcut]

Hex scale ref

That guy is the brains/engineer around here. I’m the reverse engineer

View attachment 148716

If it can be built you can unbuild it.

 

[davidwyby]

If it can be built you can unbuild it.

Yes

Or usually fix/make better. Thats my specialty

 

[tblough]

Most of my stuff is on the other end of the size range:


The channels in this mixer are 0.015" wide and that's a 0.008" radius where it enters the center chamber with a 0.020" center hole.



These other parts are 0.224" in diameter with a 0.0067" orifice.

 

[flushcut]

That’s one small orifice!

 

[Nutball]

Most of my stuff is on the other end of the size range:
View attachment 149172View attachment 149173

The channels in this mixer are 0.015" wide and that's a 0.008" radius where it enters the center chamber with a 0.020" center hole.

View attachment 149174View attachment 149175

These other parts are 0.224" in diameter with a 0.0067" orifice.

What's it for?