Page
TreeHouser
can't remember if I posted this before, but does anyone have trouble with their saws when its really humid? they seem to not run at full rpm. :what:
If it's not reaching full RPM I'd be inspecting the air vent, sounds like it might be on the verge of vapor lock. Next time it acts up and pull off the fuel cap and listen for a "wooshing" sound. It should run fine for a bit after doing this, that means it's not getting air into the fuel tank preventing fuel from coming out.
Ime saws tend to scream when that happens they lean out like at the end of a tank.
Ime saws tend to scream when that happens they lean out like at the end of a tank.
You can cook a saw by revving through the end of the tank, especially a bigger, hotter saw that needs the cooling of the gas and lubing of the oil, from what I've been told.
Good advice. I will remember this!
It's the absolute truth. Never run through the fumes at the end of a tank. It cooks a saw a bit each time you do it.