Poor man's seal puller

Al Smith

Mac Daddy
Joined
Mar 6, 2005
Messages
14,307
Location
Northern Ohio
I had this on before on some little bitty 09 ,011 or some tiny little saw I worked on .

Not everybody has a seal puller but about anybody can come up with a long drywall screw . Nothing to it,punch a tiny hole in the seal with an ice pick and screw in just a very short amount of screw and jerk it out with the hill -billy socket set .Commonly known as Channelock pliers .

The victum today was an 038 Mag II .Good ole Curt Bailey had the seal,cheap .The whole in and out is about a 5 minute job once all the shrouding ,clutch etc. has been removed ,20 minutes tops for the whole job .
 

Attachments

  • Seals 001.jpg
    Seals 001.jpg
    57.1 KB · Views: 157
  • Seals 002.jpg
    Seals 002.jpg
    53.1 KB · Views: 155
Don't understand why it is politically correct to bash hillbillys. Without their constant innovations and practicality, humans would prob. just fall over and die. :)

good one Al, thanks
 
Don't understand why it is politically correct to bash hillbillys. Without their constant innovations and practicality, humans would prob. just fall over and die. :)

good one Al, thanks

I've heard that they prefer the name Appalachian-American
 
Back
Top