Chainsaw Rebuilder?

[Marc-Antoine]

But the little inanimate things are gifted to do that, as much as the animate things (may I call them people?).

The crankshaft of my 064 broke at the clutch 2,5 years ago. Never took the time to fix it, until the bearing failed on my ms440 (well planed maintenance !). I already had the new crankshaft, so I put it in place. After struggling a bit with the bearings and seals, closing back the half cases ended well. But when I tightened the cylinder's screws, one of them stripped the case's thread.

I hope I'll fix that before two and a half years

 

[Magnus]

I some times use the bolts that tread hole them self as a quick fix. If you get right with length and metal (so it takes the temps) it will sit just as well, if not better.