Twin disk OR Caterpilar part

[PCTREE]

OK so pulled this off of my chipper this evening. It bolts to the flywheel on a Cat motor and the pilot bearing of a Twin Disk PTO is supposed to be a press fit into it. I guess the previous owner had the bearing go bad as there is something like a 30 thou lip on it so the bearing is VERY loose fit .

Part # 105002200.

Any ideas where to try to look for this part?? googled it to no avail.

 

[bonner1040]

I have no idea what you are talking about lol

 

[sawinredneck]

Look for a local bearing distributor, if you can't find one local, these guys have always been able to find what I need, and might be able to get it to you locally, http://www.yellowpages.com/wichita-...tm_medium=cpc&utm_term=brc+bearing+wichita+ks

 

[Reddog]

Twin disk dealer would be my first shot.
That should be to hold their specific pilot bearing to the flywheel center line.

Here is their dealer list http://www.twindisc.com/SalesAndService/SSResults.html?country=1

 

[Cobleskill]

I had a case like that where the bearing pressed into the flywheel. The brilliant mechanics at the John Deere shop tried to loctite a new bearing in. That lasted for one year. I had the flywheel bored and sleeved. Worked great. If they want a big price you could that.

 

[1BUS]

I'd say contact twin disk, you may have to get the housing and the bearing, or have a little machine work done. I doubt it's a CAT part #

 

[PCTREE]

My machinist and I are going to press a sleeve into it tomorrow so I will be ready for a big crane job on monday.... That and machine 100 dog bones for HHs.. Busy round here getting ready for TCIA.....

 

[Pelorus]

Please put my name on one of them bones, Paul.
I like HH I bought off you last year (Baltimore Expo) too much and would like to have a spare one.

 

[brendonv]

All i know is at least you saved .35 on that 8 k bill.

 

[Tucker943]

I saw that bill too. Made my hiney pucker.

 

[1BUS]

I missed the bill when I first looked, all I could see was the Rolling Rock, I grew up maybe 30 minutes from that brewery, I've been piss drunk on that stuff more than a few times.

 

[Tucker943]

I used to love me some Rolling Rock!

 

[PCTREE]

I still do and need to slow down!! Maybe if I got less bills like that one I could