SeanKroll
Treehouser
I'm having a problem on my mini-loader. Seems like it is operating like its stuck on 'turtle' mode, rather than normal 'rabbit' mode.
The technical support pointed toward a cartridge valve replacement and poppet valve replacement.
I have no knowledge of such things, specifically, but do have replacement cartridge valve, and random seal packs that are normally part of an 'assembly' or group of parts or whatnot, but had to be pieced together from individuals.
Any insight is helpful.
http://www.boxerequipment.com/wp-content/uploads/2015/01/Boxer-532-DX-Parts-Manual.pdf
parts 27 and 29 from the Creep Valve Group at the beginning of the manual.
Wondering/ hoping if its just a matter unscrewing/ replacing/ re-screwing together.
The technical support pointed toward a cartridge valve replacement and poppet valve replacement.
I have no knowledge of such things, specifically, but do have replacement cartridge valve, and random seal packs that are normally part of an 'assembly' or group of parts or whatnot, but had to be pieced together from individuals.
Any insight is helpful.
http://www.boxerequipment.com/wp-content/uploads/2015/01/Boxer-532-DX-Parts-Manual.pdf
parts 27 and 29 from the Creep Valve Group at the beginning of the manual.
Wondering/ hoping if its just a matter unscrewing/ replacing/ re-screwing together.