Search results for query: *

The two valves were plumbed together. the feed valve and the lift valve. The shop swapped the lines for the 2 valves and still the same outcome. I asked if the first valve, the feed valve was bypassing, then the lift valve, plumbed after the feed valve, would not get the full flow? They told...

I took it in for the valve leaking, suspecting that it had finally gave up the goat, even told the mechanic that I was almost certain that it was the valve. What a clusterfuck that turned out to be. I will not do anymore business with them. I should have just gotten the parts and worked on...

Got the chipper back today. Turned out to be the valve that I originally took it in for. I had some pretty stern words for those guys. Its fixed and working properly.

Roger that Brian. Look like I'm going to have to. Might just go ahead and get the parts on there way and get it put back together on saturday. Get some work done and just stack brush till the parts come in.

I'll have to get all the measurements tomorrow. Woodsman wants 585 per motor. Which is about what I had figured for the motors. I called and talked to their tech this morning. He told me that it shouldn't take much to get them off. I am so swapped with work that I need to be...

Excellent question, I am going to pick it up and just finish It myself. I didn't realize they were going to screw around getting them off. Called to see If they had ordered the parts for it. And they told me that they didn't have It apart yet. I had originally told them to just rebuild...

WEll the guys at the hydraulic shop, spent all day getting the motors off the machine. I'm afraid I'm dealing witha bunch of morons. I told them just to order new motors. I am a little leary of them now, since it took them so dang long to take out eight bolts and unhook four hoses. I had...

I was told 450 to 600 for the motors. I'm going to call woodsman on monday and see what they are selling them for. Are you guys refering to a valve in the hydro motor or the control valve for the feed system.

ITs direct drive off the motor. I Have ruled out all the simple things. I wish it was one of them though! The only thing that I can deduct from all the tests and troubleshooting is that one of the motors is bypassing and will not continue to turn the feed wheel when a limb is contacting...

10-4, I appreciate you all trying too. So much for buying a new gun.

guess they would be parellel, or tandem. There is a tee off the top of one motor with lines to the other. I just ran out of time and patients with the shop guys. They were slow and it was hot. Kinda Like the crane operator from last week(that is for another thread)

I left it with the boys at the shop. They are going to take the motors apart and see if they are worth rebuilding. I was hoping it was just my leaky valve, But it can never be cheap, never.

Al, I disconnected all the lines from the autofeed, plumbed it straight from the valve to the motor. all my reliefs were letting the correct pressure through. I can't think of anything else, but that the motors were bypassing somewhere internal. They were not leaking anywhere, no seals or...

The only thing that had a small leak was the valve that runs it, Bypassed that with the crush valve and still the same thing, I took everything out of the equation, autofeed. I straight plumbed it from the valve right to the motors and the same deal. I did all this at a hydraulic shop, I am...

Hydraulics, man what a pain. The chipper quit feeding yesterday. When you put a limb in the feed wheel stalls. Turns fine when no load. Everything else works no problem. I have isolated it down to the feed roller motors. Woodsman so dual drives on one large wheel. I had noticed when we...