Magnus's latest activity
-
Magnus replied to the thread Stripped Oiler Gear - Cause?.That sounds as a bad idea to me. I would not do that. I also store saws in unheated area. If I were to cut in -10c it works fine, -20c... -
Magnus replied to the thread Chainsaw repair video series.I looked a bit on videos, but its too much talk and often you see the level of experience pretty quick. Most is hung up on problem, not...
-
Magnus replied to the thread Stripped Oiler Gear - Cause?.I am still waiting for those issues all is talking about with Canola/rapeseed oil. One day I might get to see it.. Manufacturers veggie...
-
Magnus replied to the thread Stripped Oiler Gear - Cause?.If the spring is right and is in correct place it can strip the pump shafts gear If that is stuck or motionless. There is a difference...
-
Magnus replied to the thread Stripped Oiler Gear - Cause?.Was the gear stripped on pump or on crank or both? There are different threads in gears, even in same models and even several different...
-
Magnus replied to the thread Bar oil 4.95 a gallon.Sure. Different bar types have different limitation and property's regardless of brand and models. Its like choosing different types of...
-
Magnus replied to the thread Bar oil 4.95 a gallon.Groove, rail, drivelink, tiestrap all wear and how they wear is a tell of how the chain is set and maintained. Closing rail help...
-
Magnus replied to the thread Clutch Bearings - When To Replace?.If you have new bearing, put it in, save the old as spare. A tip, If you change sprocket. Put a new bar on and rotate several chains on...
-
Magnus replied to the thread Bar oil 4.95 a gallon.I meant most of my customers that run daily do. Most casual users I see here don't. I try less to convince as they do't have as much...
-
Magnus replied to the thread Bar oil 4.95 a gallon.I think that is something most do that use saw daily. I did anyway... Most that use saw daily and service here do as they rotate several...
-
Magnus replied to the thread Bar oil 4.95 a gallon.Turn those pumps up, get out as much oil as possible.. Much cheaper than wear on rim/bar/chains. Most important job the bar oil do is...