Rayco 1625A polychain

adbinc

Treehouser
Joined
Oct 12, 2022
Messages
2
Location
24060
Has anyone had any success using an aftermarket polychain on a Rayco 1625A? Rayco's polychain belt is about $200.00 I just purchased this machine and have heard Gates is a big supplier to grinders. Does Gates have a belt? If so, does anyone have a parts # for Gates? Thanks for the help!
 
Gates is a big supplier for almost everything like a few of other belts makers. I guess they have what you need, Just dig in the specs after some mesurements on your old one. Outside length or number of teeth, width, pitch, ....
 
  • Thread Starter Thread Starter
  • #3
I will keep digging. Unfortunately, when i purchased the machine it didn't have a belt. Thank for the reply.
 
Yes, the belt is a Gates Poly Chain, although I don’t think $200 is an unreasonable price. You can buy the poly chain from wherever, you’ll need the pitch (14mm I think), width (dunno on the smaller machine) and the count (also don’t know). With that info you can build the part number for the belt and price it online or wherever else that sells poly chains.
 
Back
Top