MrMoon5shine
TreeHouser
hoping someone can break it down to simple steps for me, I have done searches but would like some clarification on a couple things
one being that i understand the three adjustments screws are High, Low and idle. so LA i adjusted warmed up but no throttle, until the chain starts moving then dial it back until it stops, High I adjusted at full throttle moving it around until it sounded the best, moving it one way then backing it off, but how and when do i move the L- screw?
the reason for this retune is the weather has dropped 10 c in the last month and I just don't feel like its putting out the same power as it did, bought the saw in the spring and probably has around 300 to 400 hrs... is there any mile stone maintenance or replacements I should be doing? ie air filters...
thanks in advance for any advice for this "new" saw owner (as in first time with new saws and owning them myself )
one being that i understand the three adjustments screws are High, Low and idle. so LA i adjusted warmed up but no throttle, until the chain starts moving then dial it back until it stops, High I adjusted at full throttle moving it around until it sounded the best, moving it one way then backing it off, but how and when do i move the L- screw?
the reason for this retune is the weather has dropped 10 c in the last month and I just don't feel like its putting out the same power as it did, bought the saw in the spring and probably has around 300 to 400 hrs... is there any mile stone maintenance or replacements I should be doing? ie air filters...
thanks in advance for any advice for this "new" saw owner (as in first time with new saws and owning them myself )