Accessory cord

image.jpg This is a 7mm cord lanyard that I recently made. The sewing you can see but I also added a splicing element to it by burying about 3" of core. I made a hole through both the cover and core and put half of the strands through it and then buried the tails on both sides between the cover and core. This makes it look nicer than just burying on one side. I will use it for life support,somewhat. It is a secondary lanyard that will be use with both climb line and my other lanyard, but not by itself. I doubt you need the buries if not life support.
 
Back
Top