Morbark Blizzard 14

[Canuck]

Any one own or have experience with this chipper?

[brendonv]

No, but did you ever get that Woodsman?

[lumberjack]

Wow, someone is up late!

[Skwerl]

Brett (Mr Sir) has owned a Morbark 13 for several years.

[brendonv]

I'm feeling frisky tonight :D .

[sotc]

specs are about the same as my model13. great machine, plenty of power, big infeed chute, easy maintenance although you need the 500 dollar torque wrench to change the knives

[Stumper]

Bad marketing-who wants to work around a blizzard? They should rename it the "Ice Storm" so Jeff will buy one.

[FJR]

specs are about the same as my model13. great machine, plenty of power, big infeed chute, easy maintenance although you need the 500 dollar torque wrench to change the knives

I have the model 13 tornado, what do you mean you need the 500 dollar torque wrench? I really have never had a problem either, just had to retap a thread once. I understand using a torque wrench is always a better option, but why is it a must have in this application?

[sotc]

dealer keeps a drum in stock at all times because most people dont get the bolts torqued down enough (375 ft/lb i think) and lose a knife taking out the drum

[Old Monkey]

My old tree service decided to be cheap and not get the $500 torque wrench. It was a very costly mistake.

[sotc]

expound please

[Old Monkey]

It happened while I was using it unfortunately. It was chipping fine and then it started rattling hard to the point where the tires were bouncing off the ground. It ate its own blade which wrecked the drum, the drum's axle and the bracket holding the axle. We found little pieces of chipped up blades in with the chips.

[sotc]

wow did you hide? i would have!

[Old Monkey]

I thought it would be a good test of my employers. If they got mad at me I was going to find work elsewhere. To their credit I was not blamed, except for in jest.

[sotc]

i mean id have been afraid of the shrapnel!

[Mr. Sir]

I use the $49 Wally World torque wrench. Never had a problem with blades coming loose. It cranks up to 300 ft/lbs, so I torque till it clicks, then just give another little nudge.

[Old Monkey]

i mean id have been afraid of the shrapnel!

No I foolishly ran over to shut it off and disengage the clutch.

[Jonseredbred]

I had a throw thru drum chipper detonate one day. The anvil came up and hit the knives. It threw the floor of the chipper halfway thru a V8 engine. Oil and antifreeze everywhere in the customers blacktop driveway.

[Canuck]

No, but did you ever get that Woodsman?


No I hesitated and rborist1 scooped it up. He should be picking it up shortly. I'm still humming and hawing and just recieved a really good offer for a new blizzard 14. I think I might by the $500 torque wrench :O

[brendonv]

Bummer,

He's bean MIA, whats his deal?

[MasterBlaster]

Craig? He supposedly got too busy to post. And if I remember right, he still has that logging tape.

Ya'll remember that?

[Paul B]

yup. crazy canuck that he is!

[Canuck]

He quit posting about the same time his wife got pregnant. Now he has a brand new shiny baby boy to worry about.

[Paul B]

He quit posting about the same time his wife got pregnant. Now he has a brand new shiny baby boy to worry about.


2.25 months till we are due to have another person in our house, I am not planning on leaving here. guess I will have to see what happens eh? :D

[Old Monkey]

Bummer,

He's bean MIA, whats his deal?

I think posting on the web was in conflict with his family life and he chose his family over us. Seriously messed up priorities.

[Canuck]

I'd never choose my family over you guys

[MasterBlaster]

Well no shit.

I just want that frigging tape circulating.

[Paul B]

call him! http://www.albertaarborists.com/

[MasterBlaster]

YOU call him! You're closer!!!

[Paul B]

I will text msg him to start. see if that gets through, if not I will cal lhim in a couple days and give him what for. :)


edit: ok, txt sent. I will let you know if he respondindates.