new work video

[forestryworks]

http://www.youtube.com/watch?v=NCcnG74Iazs

one of my snagfalling jobs. good stuff that's dead and seasoned on the stump i get to keep and sell.

anything with a hint of green in it the landowner gets to keep.
i also help him cut and split his stuff.

the second tree turned out to be a little more green though the stump had some punky stuff
and a hole further down in it.

oh and there's no sound. i have a cheapo camera.

[MasterBlaster]

Just copy and paste the embed code. Snot hard.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/NCcnG74Iazs&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/NCcnG74Iazs&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[MasterBlaster]

So what happened? :?

[The Branch Doctor]

What's the significance of this thread? Is that a vid of you?

[forestryworks]

So what happened? :?

i cut down two trees.


What's the significance of this thread? Is that a vid of you?

yes, it's me.

[MasterBlaster]

Where's the video?

[The Branch Doctor]

Ok, now we have some clarity. When you start a thread it helps to throw down some kind of description of the who, what, when, where, and why mumbo jumbo.

Anyway, nice work dude.:D

[forestryworks]

Where's the video?

the link works and what you embedded works for me... :?

[forestryworks]

Ok, now we have some clarity. When you start a thread it helps to throw down some kind of description of the who, what, when, where, and why mumbo jumbo.

Anyway, nice work dude.:D

yeah, sorry about that. i got sidetracked with a nice dinner. :D

i'll edit the original post

[The Branch Doctor]

No worries mang.

[MasterBlaster]

Ahh, it finally loaded. I must have been holding my mouth wrong.

What's with all that saw? I'd a tossed those pecker poles with my 200. :rockon:

[forestryworks]

i like big saws i guess.

plus half of it was free

[MasterBlaster]

And heavy!

[forestryworks]

eh the heaviness ain't all that bad. especially in 28" wood and up.

[MasterBlaster]

But we didn't see any of that. ;)

[forestryworks]

But we didn't see any of that. ;)

you just reminded me of a vid i forgot...

pardon the piss poor low light quality

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Gvgq5Q5ZU_E&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Gvgq5Q5ZU_E&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

[CurSedVoyce]

what saw were you using?

[forestryworks]

what saw were you using?

woods ported 440 with a 28" in the first video.

the second vid 440 stock with 24"

[CurSedVoyce]

Thought so.. So not too heavy.. I would do the same.. I just don't have a 440... I use my 036 a lot ..

[woodworkingboy]

Too many ccs for those trees, and too much bar.

[stig]

and too much bar.

Finally, someone else thinks like me:D:D

[MasterBlaster]

What's with all that saw? I'd a tossed those pecker poles with my 200. :rockon:

I thought I alluded to that in this post. http://www.thecomputermechanics.com/forums/images/smilies/124.gif

Maybe not clearly...

[forestryworks]

Too many ccs for those trees, and too much bar.

well when all i own is two saws, 361 and 440... 440 is my go to.

plus there are some 30"+ snags on this place i'm working on.