Zama Carb

[High Scale]

Can anybody provide me with an exploded diagram of a Zama carb for a MS200t?

Eg, I would like to see how the diaphragms are placed.

Thanks.

[Al Smith]

It should be model C1Q s96 A or B http://www.zamacarb.com/pdfs/TechGuide_2007.pdf

[High Scale]

Thanks Al I owe you a beer. :)

[Cobleskill]

Al,
Did you see how they recommend using sealer on the Welch plugs but don't tell you what kind of sealer to use. Maybe cause nothing really holds up anymore? I am tempted to try epoxy on one I am sure is leaking. The Zama is noted for them leaking.

[Al Smith]

I never popped the plugs out of a carb,never needed to .

The old stand by for welch plug sealer ,ready for this ---fingernail polish .Nothing besides acetone will touch it . Pink ,red ,clear doesn't make any difference .

[darkstar]

Al should have his own forum 'Ask Al'
And he should get a buck a question or better.

[Cobleskill]

Zama puts a sealant on at the factory that turns gummy and leaks. I forget the model that uses an irregular shaped Welch plug. That one is most troublesome.

[Al Smith]

I kid you not about the fingernail polish .Tear apart any old HL Tilley and most of time you will find some .

It was used for a bunch of stuff before red Loc-Tite was ever made or even thought of . Oh you can use all types of sealants ,some work some do not .

Three things that will almost always work are Permatex number 2 ,Indian head gasket shellac and fingernail polish . "Old School " has been around longer than me .;)

[High Scale]

Al should have his own forum 'Ask Al'
And he should get a buck a question or better.

I would love to send Al a bottle of Merrydown:)

[Al Smith]

If you want to send me a bottle anything ,make it a bottle of Black Velvet:|: